Motorola Wi-Fi Video Baby Monitor Camera Setup and Monitoring

Motorola Blink1 Wi-Fi video monitor camera is a wireless camera for monitoring baby in home from anywhere. This Baby monitor Video camera completely wireless camera to avoid  any wired. This is excellent product for mother who stays alone at home and they need to take care baby as well as house daily works. With this video baby monitor mother can see their baby activities from each and every corner of house with smart phones. Motorola Video baby monitor camera supported Android, Iphone and Windows phones. You can monitor your baby local and globally with help of baby monitor device. You just required Wi-Fi router for local monitoring but you need internet connection if you want to monitor out from home. This post will help you to setup Motorola Wi-Fi Video Baby monitor with simple and interactive methods.Tihs post will guide  you Complete Motorola Wi-Fi Video Baby Monitor Camera Setup

Requirement for Setup Motorola Wi-Fi Video Baby monitor camera.

  1. Wi-Fi router
  2. Internet Connection
  3. Smart phone

Motorola Connected Baby Monitors Setup.

Step-1 : Account Create in Monitor Everywhere

Create Monitor Everywhere Account now   https://monitoreverywhere.com/BMS/index.jsp

Motorola MBP36XL

Step 2 : Motorola Video Baby Monitors Setup In Android and I Phones.

Go to Google Play store in android and Apps Store in IPhone Download Monitor Everywhere Apps and proceed to next step of Motorola Wi-Fi Video Baby Monitor Camera Setup.

Connected Baby Monitors Apps

Step 3: Switch  On Motorola Video baby monitor and Login With Monitor Everywhere Apps.

Connected your Baby Monitor with Power Adaptor and login Monitor everywhere Apps in your android phone and login the apps with  username and password you created in https://monitoreverywhere.com .

Audio Baby Monitors setup

Step 4: Configuration of Motorola Blink1 Video Baby Monitors Camera

Click (+)  icon on top left side and click next on next windows.

Motorola WiFi Video Baby Monitor Camera installation


Step 5: Scan and Detect Camera from Monitor Everywhere Apps

After click on next steps apps will take few second to finding near baby monitor camera, if you Motorola baby monitor Video camera properly on then with in 30 second application will detect camera and select camera.

Motorola Wi-Fi video Camera for baby monitor

Step 6: Connect Camera to Wi-Fi Network

Once you will get the Wi-Fi network name list just find your wifi name and select. Put password of your Wi-Fi name to authorise to connect your network to baby monitor camera.

motorola Blink1-S baby monitor configuration without internet


Device will take few second to connect Wi-Fi network. If everything configured properly then in next window you get camera rename option.

Motorola WiFi Enabled Video Camera Monitor - BLINK1 setup

Motorola Wi-Fi Video Baby Monitor Camera Setup Finish

Step7: View Motorola Baby Monitor camera.

After Successful setup device you will get camera detail with green View Button .click and View camera.

Motorola Baby monitor camera reset to default


How To Factory Reset Motorola Wi-Fi Video Baby Monitor Camera

reset Motorola baby monitor camera with button

  1. Switch the ON/OFF switch to ON.
  2. Press and hold the RESET button on the underside of the camera for 5 second,until you hear a beep sound.
  3. Release the RESET button and wait for the camera to complete the internal reset procedure.
  4. after about 60 seconds you will hear tow short beeps and the green LED start blinking.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *

Please type the characters of this captcha image in the input box

Please type the characters of this captcha image in the input box

Please wait...

Subscribe to TechTricksZone newsletter

Want to be notified when our article is published? Enter your email address and name below to be the first to know.
error: Content is protected !!