Buffalo Router Login Guide Step by Step?
If you own a Buffalo WXR-1900 router, accessing its admin panel is essential for managing your network settings, improving security, and optimizing performance. This comprehensive guide will walk you through how to log in to your Buffalo router, change the default password, and troubleshoot common access issues.
Before diving into the steps, let’s understand why accessing your router’s settings is crucial:
Change WiFi Name & Password – Secure your network from unauthorized access.
Set Up Guest WiFi – Allow visitors to connect without sharing your main password.
Enable Parental Controls – Restrict inappropriate content for kids.
Update Firmware – Keep your router protected from security vulnerabilities.
Configure Port Forwarding – Improve gaming and streaming performance.
How to Log in to Buffalo WXR-1900 Router
Step 1: Connect to the Router
Before accessing the router settings, ensure your Mobile/Laptop or Desktop is connected to the Buffalo router:
There are two ways to connect your PC/Laptop from Baffalo router either Wireless or Wired.
For wifi connection find default network SSID and password printed on the router sticker.
To connect using Ethernet use LAN cable to connect from router Ethernet port to PC/Laptop Ethernet port. Wired connection is more stable and recommended while setup router.
Step 2: Access Buffalo router Setting from Web Browser
Open any browser (Chrome, Firefox, Edge) and enter 192.168.11.1 default Buffalo router IP address to address bar and press enter key.
Step 3: Enter Login Credentials
Once You see the Buffalo router login page. Enter the default credentials:
Username: admin
Password: password (or check the router’s label)
Step 4: Access the Admin Dashboard
Once logged in, you’ll see the Buffalo router settings panel, where you can:
now navigate to Wireless settings to change buffalo wireless router default password and SSID network name.
Go to Wireless- Basic settings.
SSID network name- Change WIFI Name here (if router support defualt band change wifi settings for 5GHz also)
WiFI password– WPA2/PSK
Passphrase– create new WIFI password here and save settings.
How to Change the Buffalo Router Admin Password
Using the default password is risky. Here’s how to change it:
Login to Buffalo Wireless Router web interface using default settings.
Step 2: Navigate to “Administration” or “Security”
Look for a tab labeled:
“Administration” > “Password” (most Buffalo routers)
“System” > “Management” (some models)
Step 3: Enter New Password
Current Password: password (or existing one)
New Password: Create a strong password (mix letters, numbers, symbols).
Confirm New Password: Re-enter to avoid mistakes.
Step 4: Save & Reboot
Click “Apply” or “Save”, then restart the router for changes to take effect.
Troubleshooting Buffalo Router Login Issues
-
192.168.11.1 Not Loading?
Ensure you’re connected to the Buffalo WIFI router either wired or wireless and using correct IP address 192.168.11.1 without using https.
Try open browser in private mode or disable firewall or VPN if any using.
-
Forgot Admin Password?
Factory Reset the router: first Locate reset button beside or bottom side.
Press the reset button (small hole) for 10 seconds using a paperclip.
Use default credentials as printed on the router sticker.
-
Wrong IP Address?
First make sure router default IP address already not changed. To confirm default login IP address check router label. Some Buffalo routers use:
192.168.1.1
192.168.0.1
Find the correct IP via:
Command Prompt (Windows): Type ipconfig → Check “Default Gateway”
Mac/Linux: Use netstat -nr | grep default
FAQs: Buffalo WXR-1900 Router Login
Q1: What if I can’t access 192.168.11.1?
Restart the router.
Use buffalonas.com instead.
Check firewall/VPN settings.
Q2: How do I update Buffalo router firmware?
Log in → “Maintenance” > “Firmware Update” → Download latest version from Buffalo’s website.
Q3: Can I set up a guest network?
Yes! Go to “Wireless settings ” > than navigate to “Guest Network” and enable it.
And configure SSID and password for Guest wifi.
Q4: Why is my WiFi slow after login?
Check for interference (microwaves, other routers).
Change WiFi channel in “Wireless Settings”.
Final Thoughts
Logging into your Buffalo WXR-1900 router is simple once you know the steps. Always change the default password, keep firmware updated, and optimize WiFi settings for the best performance.
Related Post
- 10.10.10.254 Default Admin Login Guide
- how to fix internet connection problems and WiFi Problems
- Top 5 Best Alternate Open Source Firmware for Your Routers