GEPON OLT Configuration for Fiber Network
OLT, GPON, EPON, ONU, ONT all are equipment used in an optical fiber network to provide maximum and highest data transmission speed with minimizing network costing. OLT Device used at the start point of centralizing office node and ONU used at last endpoint to termination of the line. Between OLT and ONU fiber, Splitter and other passive network devices are used to distribute fiber networks. The GEPON OLT Configuration for Fiber Network very easy to understand if you follow a proper network diagram. Also, know how to protect your Network product from lighting.
OLT (Optical Line Termination )
The OLT also called Optical Line Terminal. OLT is an endpoint of the passive optical network (PON).
OLT Main Function is converting electrical signal using by service provider equipment and Fiber optical signal used by the passive optical network (PON), its co-ordinate Multiplexing between end-user device ONU (Optical Network unit ) or ONT (Optical Network Terminals ).
The OLT installed Service provider end and client equipment use ONU or ONT for endpoint service providing. In the simple word its starts with OLT and End with ONU o ONT at Costumer end.
EPON and GEPON
PON full form is Passive Optical Network, it’s used for point to multipoint network with fiber optical to reduce the costing of the fiber network.
Standard of PON :
1.GPON
2.EPON
1. GPON (Gigabit PON)
GPON is a new generation of broadband (BPON)over Passive network access. GPON provides high bandwidth speed up to 2.5Gbit/s. The protocols used by GPON are ATM, GEM, and Ethernet.
2. EPON (Ethernet PON)
full form of EPON is Ethernet Passive optical network.EPON is an IEEE standard, used Ethernet to sending the data packet. EPON and GEPON is a FAST Ethernet over fiber network up to 1.25 Gbit/s Download and upload data stream.
- 5 Best Long Range Wireless Point to Point Device for Internet and CCTV
- Protect Network and Wireless Devices from Lighting and Thundering
ONU/ONT:
ONU full form is an Optical network unit and ONT Full form is an optical network unit. Passive Optical Network Consist of a centralized office node called OLT (Optical Line Terminal) and Endpoint Costumer Site used Equipment called ONU and ONT. Between OLT and ONU there is Fiber and splitter used to distribute fiber network.
While internet plan speed increases fiber takes over all the LAN network and wireless networks. LAN and Wireless networks having a limitation to deliver speed to long-distance where Fiber can easily provide Hight SPeed internet plan up to 10 Gbps with the latest OLT technology.
Initial Fiber starts with the EPON OLT network which now upgraded to GPON OLT network and Gigabit ONT device for last-mile connectivity. fiber network can easily provide internet connection up to 20 KM or more depends on the fiber networks and device supported capacity.
It does not matter you are using DBC OLT, VSOL GPON Olt, Sysrotech OLT device or Huwaeie OLT device the connection method and configuration some based on Fiber technology.
Related Post
- How to Connect Any Wi-Fi without Password from Mobile?
- How to setup QoS to set internet Speed limit for WiFi User
- How to Choose Best Wi-Fi Router for Your Home