Voltek MEN-3406B Switch Setup and Configuration (with Picture)

Voltek MEN-3406B L2 Switch configuration (Last Updated On: July 14, 2018)

Voltek MEN-3406B L2 Switch configuration and setup for Managed Network

Voltek MEN-3406B L2 Switch configuration wtih  Managed Layer 2 Access Gigabit Ethernet Switch with 4-port 10/100/1000Base-T + 2-slot Gigabit SFP,  in switch model B stand for a Battery supported for backup during power frailer to avoid network downtime. It is designed for rural and village where power cut issue. MEN3406 provide 2 SFP port to directly connected fiber to switch for uplink and 4 copper Giga port provide 1gbps speed to end user. Voltek 3406B L2 managed switch managed with the web as well as console. Voltek 3406B L2 Managed Switch Equipped with Dual 100/1000 multi-rate SFP uplinks which can be.

Configured as ring ports to provide link redundancy in gigabit fiber based ring architecture networks.

Volktek Switch Suitable for outdoor installation and managed the network, voltek let you easily and mange network with stable and high-speed performance with ring feature to avoid down of single network backbone.

 

Volktek MEN-3406B L2 Switch  Main Feature

Confiquration: Command Line Interface, Telnet, Web GUI, Syslog  SNMP v1/v1c,  anagement VLAN, SNTP, Firmware Upgradable, Configuration Upload/Download

VLAN: IEEE 802.1Q Tag-based VLAN, Port Isolation

Traffic control:  IGMP snooping, QoS, Rate Limitation, Storm Control, Port Isolation, STP, RSTP, LLDP

Diagnostics: LED status, SNMP trap, E-mail alarm, SFP DDMI, Port Mirroring, RMON, Port Statistic.

Voltek MEN-3406B L2 Switch Model Type :

Voltek MEN 3406 three different switch category with the same model according to feature.

MEN-3406 : Managed L2 4-port 10/100/1000, 2-slot 100/1000 SFP

Switch, w/ 12VDC Adapter

MEN-3406B: Voltek MEN-3406B L2 Switch Managed L2 4-port 10/100/1000, 2-slot 100/1000 SFP Switch, w/ 15VDC Adapter, with Built-in 12VDC Battery Charge.

MEN-3406BS : Managed L2 4-port 10/100/1000, 2-slot 100/1000 SFP Switch, w/ 15VDC Adapter, w/ Console Port, with Built-in  12VDC Battery Charge


Voltek MEN-5428 Switch Configuration

 

Voltek MEN -3406 L2 Switch Login with WEB.

Voltek Switch Default IP Address: 192.168.0.254

Default username : admin

Default password : admin

Voltek Switch Default VLan ID – 1

 

Configure Laptop/PC with 192.168.0.X Series IP Address – See here how to configure IP Address in PC

 


Voltek MEN-3410 L2 managed Switch Configuration

 

Voltek MEN -3406 L2 Switch Change Management IP with WEB :

Voltek Default Management IP Address is 192.168.0.254 and default management VLan -1 .

  1. Go to Basic Settings à General Settings
  2. System – > 
  3. Host Name : Change Switch Hostname
  4. Management VLAN : 1
  5. IPv4 Settings : Change IP Address :

Subnet Mast

Default Gateway:


Voltek MEN-4110 L2 Switch configuration with WEB

 

Voltek MEN -3406 L2 Switch Change Management IP with Command Line:

You can change and configuration Voltek L2 Switch with Command line. For command line you can use console port or telnet to the configuration in the command line.

Voltek MEN 3406 Doest have Console port so you can use Telnet.

Telnet 192.168.0.254

L2switch login: admin

L2switch>enable  (enter)

User: admin

Password: admin

L2switch# config t

Voltek Switch Change IP address  & Change Management Gateway

L2SWITCH(config-if)#ip address 192.168.0.200/24

Success!

L2SWITCH(config-if)#ip address default-gateway 192.168.0.1

Success!

Save configuration

L2SWITCH(config)#write memory

How to add user Account in Voltek MEN -3406 L2 Switch from WEB :

You can add multiple user to manage switch and network with limitation of rights of using Voltek switch

Add New and Change username Password in Voltek Switch with GUI mode.

  1. Management à User Account

User Account Settings : 

Username :    ( use user name here )

Password :  ( use password here )

User Authority  : Set user Type here

Click Apply button.


Voltek MEN-3410 Battery Voltage

 

Related Post

 

Volktek MEN 5428 L2 Manages Switch Console Connection Video Tutorials

 

 

Download Voltek MEN3410 Switch Configuration Manual in PDF

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Please type the characters of this captcha image in the input box

Please type the characters of this captcha image in the input box

This site uses Akismet to reduce spam. Learn how your comment data is processed.