TP-Link Deco M5 Mesh WiFi System Setup and Configuration (with Picture)

TP-Link Deco M5 Mesh WiFi
(Last Updated On: July 11, 2018)

TP-Link Deco M5 Mesh WiFi System Setup and Configuration for Home.

TP-Link Deco M5 Mesh WiFi system recently launched  for whole home WiFi connectivity. Deco M5 home mesh wifi system with dual band wifi router 2.4GHz up to 400Mbps and 5.8GHz support up to 867 Mbps speed. It’s a best new easy configuration product by TP-Link with Mac and Android Mobile Apps configuration. Deco Apps let you give finger print monitoring of your WiFi network at your home. TP Link Mesh system is a power full signal strength with Mesh connectivity which will give you wireless connectivity even with one Deco to another Deco.Deco M5 comes with 3Device single pack and its  Works with Alexa and IFTTT. see TPlink M5 WiFi System Specification below.

Popular Post : How to Connect Any Wi-Fi without Password from Mobile?

See Also – How to Setup TP-Link AC750 Archer 20 Dual Band Router First time

TP-Link Deco M5 Whole Home Mesh WiFi System Review and Specification

Hardware


Ports: 2 LAN/WAN Gigabit Ethernet Ports, 1 USB Type-C Port


Buttons: 1 Reset button on the underside


Antenna Type: 4 internal antennas per Deco unit ·


Wireless Onboarding: Bluetooth 4.2 ·


Flash: 32 MB ·


SDRAM: 256 MB ·


External Power Supply: 12 V/1.2 A ·


Dimensions (Dia x H): 4.7 in. x 1.3 in. (120 mm x 38 mm)

 

You may Also Like – How to use WhatsApp without Phone Number with Tricks (2018)

Wireless


Wireless Standards: IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz


Frequency: 2.4 GHz and 5 GHz


Signal Rate: 867 Mbps at 5 GHz, 400 Mbps at 2.4 GHz


Transmit Power: FCC:<30dBm,CE<20dBm(2.4GHz) <23(5GHz)


Wireless Security: WPA-PSK/WPA2-PSK


 

Software 


Working Mode: Router, Access Point


WAN Type: Dynamic IP/Static IP/PPPoE


DHCP: Server, Client


Quality of Service: WMM


Firewall Security: SPI Firewall


Protocols: Supports IPv4 and IPv6


Guest Network: 2.4 GHz guest network x 1, 5 GHz guest network x 1


Features: Parental Controls, 3-Year Built-In Antivirus, QoS (Quality of Service), Reporting, Assisted Setup, Address Reservation, Port Forwarding, TP-Link DDNS ·


Management: Local Management, Remote Management


See Also5 Best Long Range Wireless Point to Point Device for Internet and CCTV

AC1300 Whole-Home Wi-Fi System

See the  deco m5 unit to know hardware port available for physical connection of internet and from P.tp-link deco m5 manual

TP-Link Deco M5 Configuration With Androids and IOs Apps.

Deco M5 Configuration very user friendly and esiy to setup with non technical knowledge also because its user friendly mobile application assist you step to step for configuration just in your finger tips .You required Deco mobile apps to start configuration of Deco WiFi system. If you are Android user you can download Deco apps from Play store and if you are I Phone user you can download it from apple store. You can directly download from here just scan bar code give below and you will get apps to download.

tp-link deco setup first time

Download Deco Andorid Apps Free Now

Scan QR code you will get download page in your android and I Phone download it and create account if you do not have any TP-Link account already.

After Download open Apps and Login,

How to Factory default tp link deco ap

 

TP-Link Deco M5 Connection setup with Modem

Connect your Deco M5 Device to you ADSL Modem/VDSL Modem or Internet router in your home network.

p-link deco m5 access point mode

Now Open Deco Apps and Proceed to Configuration

Read Also –Top 10 Best CCTV Camera brands with HD Video Recording (2018)

Deco M5 Location Settings with Deco M5 Mobile Application.

TPlink deco m5 plus price

Choose your Deco M5 Location from List and select. if you didn’t find your location in list just click create location and Add your New location in list. Select location and click  Next.

 

TP-Link Deco M5 Mesh WiFi system Wireless Configuration.

In this option you will get option for Wireless name and Password, wireless name also called SSID and WiFi password. This Name and password will use connect your mobile phone and Laptop to connect you Wi-Fi network.

tp-link deco m5 reset button

Click Next button to proceed configuration.

 

TP-Link Deco M5 Mesh WiFi system Add Multiple Device in Home.

After Finish first deco configuration you add multiple device in home. Just click Add another Deco M5 and proceed to same configuration step you did for first Deco M5 Device.

tp-link deco configure with windows

If you have only one Deco to configuration you can press I’m done for now. You will go in dashboard from where you can manage your Deco M5 installed in your homes.

 

How to Monitor Online Deco M5 and total  Connected User.

From Deco M5 very easily to monitor your all Deco internet, total user connected to all deco installed in home and Deco Online and Offline status with single windows. See details give below with picture.

  1. TP-Link Deco M5 Online Status: if all deco device will online then you will get “All Deco are online. But if 1 deco offline then you will get 1 deco offline with location icon.

tplink deco m5 access point wifi configuration

  1. Deco M5 Internet Download and Upload Speed: This option will show you Total download and Uploading speed of your deco device installed in your home and office
  2. Deco M5 Total User Online : This option will show you total number of wifi user connected to all Deco M5 device installed in your home and office area.

See Also – 8 best Wi-Fi router for home and office under 1000 Rs only

TP-Link Deco M5 Mesh Wi-Fi system Guest Network Configuration.

TP-Link Deco M5 Mesh Wi-Fi system secure Wi-Fi zone for home because its give you option to enable Deco M5 Guest network for guest people in your home. Using a guest network always prevent your Wi-Fi password stolen from guest and other people who comes very often to your home.

Deco M5 Guest Network Enable :

Open Deco apps and go to Settings main menu. Click WiFi Settings from list

How can I reset or reboot my Deco Whole-Home Wi-Fi

Now click move button from Guest Network and type guest Wi-Fi network name  and Guest Wi-Fi password. This WiFi name and password will use to connect your Wi-Fi for guest only.

 

how do i connect my tp link extender

  1. Click button to Enable Guest Network
  2. Click option to set Guest network name and password.

tplink m5 guest network settings

Guest Network

Network Name : Type WiFi name for guest only

Password : Type Password for guest network if you want to add

 

 

TP-Link Deco M5 Mesh Wi-Fi System share WiFi with Phone Shake.

TP-Link Deco Mobile apps give you power to share your Wi-Fi network with just shake your phone. See how to share Wi-Fi network in deco apps with shake mobile.

Open Deco Apps in your Android or I phone just shake your Phone your will option to share Wi-Fi network Main Network and Guest Network. Just click network your want to share.

Deco M5 Mesh WiFi system

Shake your phone First

Which one your want to share

  1. Main Network

  2. Guest Network.

Choose network your want to share that’s it.

Buy TP Link DECO M5 Kit instant 50% discount | Activate Deal 

 

Related Post

TP-Link CPE220/CPE210 Wireless Access Point Configuration First time (2018)

How To Configure Load Balancing on TP-Link TL-R480T+ (with Picture)

How To Configure Load Balancing on TP-Link TL-R480T+ (with Picture)

Be the first to comment

Leave a Reply

Your email address will not be published.


Please type the characters of this captcha image in the input box

Please type the characters of this captcha image in the input box

*


This site uses Akismet to reduce spam. Learn how your comment data is processed.