iBall AC1200 Dual Band WiFi Router Setup & Configuration First time

iBall AC1200 Dual Band WiFi Router Setup (Last Updated On: December 6, 2018)

The iBall 1200M smart dual band wireless router configuration with PPPoE and static internet type. avoid poor wifi connectivity and unstable network using proper configurations steps. see beginner guide foriBall AC1200 Dual Band WiFi Router Setup

IBALL AC1200 Dual Band WiFi Router Setup and Configuration First Time

iBall AC 1200 Dual band 5 GHz and 2.4 GHz wireless radio for high-speed internet connectivity. IB-WRD12EN is a smart dual-band wireless router for gaming and live streaming with 1200 Mbps wireless speed. This post will assist you basic instruction about iball dual band 1200 Mbps wireless router setup and configuration first time for your home internet. To making a problem-free wireless network and stable connectivity configuration should be proper. Before going to configuration part check out the basic and important feature comes with iBall baton dual band 11ac wifi routers.

iBall WRD12EN 1200M Smart Dual Band WiFi Router Specifications

iBall smart dual-band router having 4 Omnidirectional external antenna for long range signal coverage. Physically WiFi router having 1 WAN and 3 LAN port for wired internet connection for Desktop and Network printers. WRD12EN fully supported multi-wireless modes such as AP, WISP, AP Router, and repeater mode. Iball ac1200 wifi router gives you Data Transmission Rate -5 GHz: Up to 867 Mbps, 2.4 GHz: Up to 300 Mbps. Safety side iBall smart dual band router support guest wireless network as well as parental control and bandwidth management.

This dual-band MIMO router best for a standard size home and apartment to get seamless wireless connectivity and buffering free video experience.

 

I-Ball Smart Dual Band 1200M WiFi Router Connection Diagram

The configuration of any wireless router first step is making physical connections. To configuration and setup, your iball dual band wifi router unbox your device and follow the steps to connect with PC/Laptop.

  • Power on Wi-Fi router with power adapter comes with box.
  • WAN port- Connect internet cable coming from the internet service provider.
  • LAN Port: connect cable to PC/Laptop LAN port for configuration.

 

iball baton router wifi password

I-Ball 1200M Smart Dual Band WiFi router Login First Time

Iball router first-time login required default settings to access the web interface for configurations.

iBall WRD12EN default IP Address: 192.168.1.1

Default username/password – NA/ need to set on the first login.

Configure your Laptop/ PC Lan IP to same IP series of iball wifi routers.

EXP- use 192.168.1.10 for your PC/Laptop.

See here how to configure LAN IP address in Desktop and Laptop.

Open the web browser and type default IP (192.168.1.1) and hit the enter key.

iball baton wifi router range

Click Start button to proceed first-time login setups.

Press the Skip button for next steps.

how to use iball wifi router as repeater

Set Login password for iBall WiFi Router first time login using this steps.

Type the login password as shown below picture. If you do not want to use login password you can check Not required option.

Highly recommended use password to make secure access for your wireless routers.

Click Next button to login router now.

Enter the password to login your iBall router.

iball ac1200 wifi router default password

iBall Dual Band Wi-Fi Router Status page

After successful login, you will land on the status page. In the status page, you can find the connected client information and internet status.

iball baton 150m wireless n router wifi settings

iBall AC1200M Dual Band Wi-Fi router WAN configuration

The first step is the configuration of WAN details.

To configuration of WAN port keep ready internet details such as PPPoE username password and static IP details. Get the details from your internet service providers.

Go to WAN Settings from the left side vertical menu

WAN Port:  WAN cable should Be Plugged.

WAN Type: choose the internet type. From PPPoE, Static and dynamic.

Here I am using PPPoE wan type for my internet.

ISP username: type PPPoE username.

ISP password: type PPPoE password here.

DNS Settings: you can use custom DNS  here.

Click the Connect button to save settings.

iball router wifi not working

WAN configuration done with this option now proceed to configure wireless SSID and password.

 

iBall 1200M Dual Band WiFi Router Wireless Configuration

To making your wireless network protected from un-authorized access wireless settings should be proper.

To configuration wireless name and password follow the steps.

Go to Wireless settings from the left side menu.

iball baton 750m wireless n router wifi settings

There is two part of wireless settings need to configure as shown below.

1: Wireless SSID & Security

2: Wireless Parameter

 

1: Wireless SSID & Security

In this option, you can set WiFi name and password for 2.4 GHz and 5 GHz.

A: 2.4 GHz Wireless

SSID: type WiFi name for 2.4 GHz in this box.

Encryption Mode: WPA2-PSK (recommended)

Password: type password in this box (use alphanumeric and special character combination to make a strong password.

 

B: 5 GHz Wireless

SSID: type WiFi name for 5 GHz in this box.

Encryption Mode: WPA2-PSK (recommended)

Password: type password in this box (use alphanumeric and special character combination to make a strong password.

 iball wifi router login ip

Click Save button to apply settings for wireless configuration.

2: Wireless Parameter

Wireless parameter provides you option to set wireless channel, wireless mode, and bandwidth size.

A: 2.4 GHz Wireless Parameter

Wireless Mode: Keep it to Automatic option.

Channels: use Auto if only one AP using in the location. Use the 1,6,11 channel if using more than 1 access point in the same location to avoid overlapping channels.

Bandwidth: use 20/40.

 

B: 5 GHz Wireless Parameter

Wireless Mode: Keep it to Automatic option.

Channels: use Auto if only one AP using in the location. Use the channel as per your country regulatory.

Bandwidth: use 20/40 if your internet plan is 30-40Mbps but if your internet plan is more than 40mbps and you want to use local network faster use the 20/40/80 to get more wireless speed.

iball dual antenna wifi router configurations

iBall Dual Band Ac1200 Guest WiFi configuration

The guest network is the smartest way to keep private your wifi password while any guest comes to your home and office. A guest network allows your guest to connect with different wifi password with managing speed limit and device access restriction.

To enable guest network in iball Wi-Fi router follows the steps.

Go to Guest Network

Enable Guest network using the button.

1: 2.4 GHz SSID: type the guest wifi name for 2.4 GHz here.

2: 5 GHz SSID: type Guest network name for 5 GHz in this box.

3: Guest Password: type the password for the guest network (password will be the same for both networks)

5: Shared Bandwidth for Guest: set the bandwidth speed for the guest network you want to provide.

iball baton wifi router security

Click Save button to apply settings.

 

IBall Smart Dual Band WiFi Router LAN IP Configuration

Every wireless router comes with default IP address and easily accessible with default settings. Always recommended to change the default IP address before using in networks. To avoid weak wireless network connectivity change the default settings always.

Go to System Tools from the left side menu

Choose the LAN option

Change the IP address.

iball baton wifi router LAN IP change

This is the basic configuration manual for iball dual band wireless router. follow the steps to iBall AC1200 Dual Band WiFi Router Setup first time for any internet type.

 

Related Post

Video: I-Ball AC1200 Smart Dual Band WiFi Router setup First time for home

Leave a Reply

Your email address will not be published. Required fields are marked *

Please type the characters of this captcha image in the input box

Please type the characters of this captcha image in the input box

This site uses Akismet to reduce spam. Learn how your comment data is processed.