How to Reset Your Motorola Cable modem or Router: Simple Steps
Do you forget your Motorola router or Cable modem login password or facing any connectivity issue or performance down means your Motorola router acting up? Slow speeds, connection drops, or forgotten passwords can often be fixed with a simple reset. This guide will help you to recover access of your router if forgotten password and simple steps to reset your Motorola router—whether you need a soft reset (reboot) or a full factory reset.
Why Reset Your Motorola Router?
Do you really required to factory reset your Motorola router or cable modem. There are few reasons you should go with full factory reset your Motorola Router.
Resetting your router can help with:
Fixing internet connectivity issues – If your Motorola router not performing like before and unstable connectivity.
Restoring forgotten admin passwords – If you change default login password and forgotten new password than reset can restore your modem into default settings.
Clearing network configuration errors – if your router misconfigured and not working than you can reset Motorola router to start from starting.
Preparing the router for resale or reuse – If you upgrade your Motorola modem with higher model number and looking to resell your old Motorola than you can factory reset it to turn it as a new wifi router.
There are two types of resets:
- Soft Reset (Reboot) – Restarts the router without losing settings.
- Factory Reset – Restores the router to default settings (erases all customizations).
How to block Website in Mikrotik Router OS from Winbox [URL & Keywords]
Method 1: Soft Reset (Reboot)
A soft reset simply restarts the router without changing any settings.
Steps:
- Unplug the router adapter from the power socket or switch power button.
- Wait 30 to 40 seconds to ensure a full power cycle.
- Plug in router adapter back to power socket and wait for all lights to stabilize (1-2 minutes).
Method 2: Factory Reset (Hard Reset)
A hard reset method is a physical process that performs with a tiny reset switch available on the router. Making Motorola router factory reset wipes all custom settings (Wi-Fi name, password, port forwarding, etc.). Use this if:
- You forgot your admin password.
- The router is malfunctioning badly.
- You’re selling or giving away the router.
How to Reset MikroTik CCR Router from Reset Button
Steps to Factory Reset:
- Locate the Reset Button
- Most Motorola routers have a small reset button or recessed reset button on the back or bottom.
- You’ll need a paperclip or pin to press recessed reset button.
- Press and Hold the Reset Button
- Turn on your Motorola router and wait few seconds to bootup it, now press and hold the reset button for 10-15 seconds.
- The router’s lights will suddenly blink or turn off, indicating the reset has started.
- Wait for the Router to Reboot
- Release the button and wait 2-3 minutes for the router to restart.
- The lights will stabilize when the reset process is complete.
- Reconnect to Default Wi-Fi
- After resetting, the router will revert to factory settings.
- The default Wi-Fi name (SSID) and password are usually printed on a sticker on the router.
- Connect your devices using these credentials.
-
Reconfigure Your Router
If you want to customize settings:
- Open a browser and enter the router’s IP address (e.g., 192.168.0.1 or 192.168.100.1).
- Log in with the default username and password (often admin for both).
- Set up a new Wi-Fi name, password, and security settings.
How to Access WiFi Router if Forget the Password
Troubleshooting Reset Issues
Reset button not working?
- Ensure you’re holding it long enough (full 15 seconds).
- Try unplugging the router, then holding the reset button while plugging it back in.
Can’t access the admin page after reset?
- Check the correct default IP address (varies by model).
- Disable VPNs or proxy settings on your device.
- Make sure you are tyrping IP address in correct format. not wrong IP address 192.168.o.1 or http//192.168.0.1 all are invalid IP address.
Final Words
Resetting your Motorola router is a quick fix for many common issues. A soft reset is great for minor problems, while a factory reset is a last option for major troubleshooting.
Related Post
- How to Set Internet Speed Limit per IP in Mikrotik from Winbox
- Top 5 Best Alternate Open Source Firmware for Your Routers
- Best Firewall For Home